How to Use Fruit Grinding Machine Step by Step?

1. Clean the fruit first. If it is a large piece of fruit, such as pineapple and other fruits. It needs to be cut into block-shaped.
2. Turn on the fruit grinding machine switch. Pour the block shaped fruit into the feeding port of the machine at a constant speed. The rotating blades inside the machine will quickly crush the fruit into a puree.
3. The fruit paste will be discharged from the discharge port of the machine. Users can store it in a container or eat it directly.
4. Please note that before using the fruit and vegetable grinding machine, please read the instructions carefully, and follow the correct method to connect the power and operate the switch.

Precautions for using the machine

1. The machine has been debugged before leaving the factory, and it will leave the factory only if everything is normal. However, due to the transportation process, it may cause the bolts to loosen. Users are requested to carefully check whether the equipment is in good condition before use. Before use, the four anchor bolts should be adjusted to the basic level before use.
2. This fruit grinding machine is a three-phase 380V power supply. After turning on the power, first test the machine to see if the blade is running in the correct direction and if it must not be reversed. For personal safety, please ground the device shell, and the grounding resistance shall not be greater than 4 ohms.
3. If the machine makes abnormal noise during the test run, it should be stopped immediately. Then check whether the three screws of the ステンレス鋼 barrel are too tight, and then loosen them slightly with a wrench. Repeat the operation several times until there is no sound.

Fruit grinding machine capacity

The output of this fruit grinding machine is 600-800kg/h. In addition, the machine is made of 420 stainless steel, and its dimensions are 950x380x1000mm. The power is 2.2kw. If you need this machine, please feel free to contact us.